Admiral ADM8 10080170 Bedienungsanleitung

MODEL: ADM8 10080170 Operating Instructions CARPET EXTRACTOR Read these instructions before operating the machineRR 86038320 03/16/07 PRV NO. 986

CONTROLS/COMPONENT LOCATIONS 1. Solution Accessory Tool Hookup. Used for various auxiliary cleaning tools. 2. Vacuum Hose Door. Used to connect v

CONTROLS/COMPONENT LOCATIONS 1. Solution Intake Cover. 2. Vacuum Intake Cover. 3. Float Shut-Off. 4. Clean-Out Opening. 5. Pour Spout. 6. Lift

FILLING OPERATIONS RECOVERY TANK SOLUTION TANK STEP1 Remove recovery tank 140°F (60°C)8 gal. (30.3 ltr.)Add water or STEP2

OPERATIONS Remove electrical cord and literature from recovery tank. Fill solution tank (see filling instructions page 3-5). STEP1Adjust brush to pro

OPERATIONS STEP5Adjust handle to comfortable operating position. Tip machine back by main handle to move to starting point. Lower machine to floor. S

CLEANING PROCEDURE Start at wall closest to power outlet. Pull straight back without pushing down on handle. STEP1Release intermittent trigger switch

MACHINE DATA LOG/OVERVIEW ADMIRAL 86038230 03/16/07 MODEL _______________________________________ DATE OF PURCHASE ______

TABLE OF CONTENTS ADMIRAL 86038230 03/16/07 2 Machine Data Log/Overview...1 Table of Contents...

HOW TO USE THIS MANUAL ADMIRAL 86038230 03/16/07 This manual contains the following sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS -

SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the followin

HAZARD INTENSITY LEVEL ADMIRAL 86038230 03/16/07 2-2 The following symbols are used throughout this guide as indicated in their descriptions: H

GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. NOTE: In Canada, the use of a temporary adaptor is notpermitted by the Canadian Electr

TECHNICAL SPECIFICATIONS POWER TYPE ELECTRICAL: 115 V, 15 A, 60 HZ ELECTRIC VACUUM MOTOR: (1) –3 stage, 1 hp, 99 cfm (2.80 cubic meters/min.) Wate

CONTROLS/COMPONENT LOCATIONS 1. Main Handle. Used to pull and maneuver machine. 2. Handle Adjustment. Used to adjust height of handle. 3. Electr